How to Build Your Own Small Solar System-How Efficient is Solar Energy

How to Build Your Own Small Solar System-How Efficient is Solar Energy

This is the first post in a blog series Titled “How to build your own solar system, for the beginner on a small budget.’

This series is for the person who wants to move off-grid in a small living space such as a cabin, tiny home, RV, Skoolie, camper or truck camper, etc. and, as a novice without a lot of money, wants to produce their own electricity through a small and simple solar system that is easy to use and maintain.

If this describes you, then follow along as I take you through the basics of solar energy in a step by step fashion and walk you through the basic fundamentals, design, and installation process in a simple and easy to follow format designed specifically for the beginner. My goal is to show you how to design and install a solar system that meets your basic living needs in an off-grid lifestyle.

If you would like to be notified when each module of this series is released just fill out the information below.

Subscribe

* indicates required

How efficient is solar energy?

When it comes to the efficiency of solar there are a few things to consider. We will discuss the inherent drawbacks of using the sun for energy production, photovoltaic cells, the efficiency of solar system components, and the efficiency of system design.

The sun as a source for energy

The most powerful aspect of solar energy is the massive amount of energy that reaches the earth’s surface. According to the University of Tennessee Institute of agriculture, 1 square meter at sea level will be bombarded with 1000 watts of energy from the sun on a sunny day. That’s a lot of energy, and the sun isn’t going anywhere anytime soon. So, in regards to efficiency, the sun itself is extremely efficient.

The sun bombarding the earth with solar energy

The downsides to using the sun as a source for energy are obvious. First, not every day is sunny and a long stretch of cloudy days can severely lower our ability to produce electricity. Finally, the sun doesn’t shine 24 hours a day.

The current efficiency of the photovoltaic cell

At the time of publication of this information the highest efficiency rate of photovoltaic cells is as follows in the chart below.

This information is credited to https://www.cleanenergyreviews.info/blog/most-efficient-solar-panels

The efficiency of solar cells has come a long way in the last few decades and continues to get better. It’s worthy to note here, since this solar system guide is written specifically for a low budget, the difference between the highest efficiency rating and the lowest efficiency rating is only 5%.

This represents a 20% difference in efficiency respectively between the panels, but in the larger picture of a photovoltaic solar system as a whole, when taking the cost of the solar panels into account, the difference isn’t worth the cost unless you have a larger budget to work with. That being said, the cost isn’t the only factor when customizing a system.

A more efficient panel is smaller. If space is a consideration in your situation then a more compact panel may be worth the extra cost. We will go into greater detail about this in Later posts.

The efficiency of solar system components

The efficiency of solar panels is not the only thing to consider in your solar system. The other components all have their own efficiency levels also. The charge controller, inverter, and battery bank all need to be considered.

In a perfect world where money was no object, we would just install the most efficient component at every stage of the design, but this Blog series is dealing specifically with a low budget and simplified system. We will have to be choosy about where we spend our money to gain efficiency.

The Charge Controller

The charge controller is what takes the current from the solar array and converts it to a voltage that the battery bank needs to charge. It also controls the voltage to the battery bank so that the battery bank doesn’t overcharge and damage the batteries. We will discuss charge controllers in more detail in future blog posts. For now, we will briefly talk about the two main types of charge controllers and their efficiency.

MPPT charge controllers

MPPT stands for Maximum Power Point Tracking. MPPT charge controllers can have an efficiency rating of up to 99.5%. Saving the details for chapter 12, which is dedicated to charge controllers, I will mention that the main reason to spend the extra money for an MPPT charge controller when designing a budget-friendly system is if your solar array has to be farther away from your battery bank.

PWM charge controllers

PWM stands for Pulse Width Modulation. PWM charge controllers have an efficiency rating of 75% to 85%. For a small solar system where battery voltage and solar array voltage are equal, a PWM will work well and can be an area where the DIY solar design can save some money.

The Inverter

The Inverter will convert DC electricity to AC electricity. The difference between DC and AC electricity will be discussed in chapter 5. For our discussion here just know that AC electricity is what almost all household appliances use. The simplest solar system designs do not require an inverter. More on this later.

It isn’t possible to convert DC electricity to AC electricity without losing some power due to heat that is produced in the process (this is similar to friction). Efficiency ratings for inverters are somewhat complex because they are affected by the Load or the amount of power being consumed at any given time. Because of this, the efficiency of an inverter can vary throughout the day where efficiency is typically highest at around 80% of maximum load, but every inverter is different. When choosing an inverter it is very important to choose the right one for the specific parameters of your system design in order to maximize the efficiency of a particular inverter.

Inverters are either PURE SINE WAVE or MODIFIED SINE WAVE. Their differences and which one you should choose will be discussed in more detail in chapters 14 and 15.

The Battery Bank

There are four main types of batteries for solar use. Lead Acid, Lithium-Ion, NICAD, and Gel. To be honest it’s not really worth going into all the different types because for small, budget-friendly solar systems AGM/Lead Acid batteries are the only reasonable choice. We will go into more detail about the different kinds of AGM batteries in chapter 17.

The efficiency of system design

The most important aspect of efficiency is the system design as a whole. Every system will be different based on the particular energy needs being met by the system. There are many variables to consider even for a small solar system. I will walk you through each step in determining which variables will have priority in your system and help you design your system based on those priorities. In a small budget-friendly system compromises will have to be made, but with the help of this blog series, you will know which compromises to make.

Why should I choose solar?

When it comes to small off-grid residential energy production systems, there are three choices. You can go with solar, wind or hydro. All of these choices are good and each has specific advantages, but solar is the one to go with if you’re a beginner and you’re on a small budget. Wind is more expensive by around 35% more expensive and has a substantially higher degree of difficulty because of the installation process. Hydro can be about the same price with only a slightly higher degree of difficulty, but it requires a year-round water source in close proximity to your living structure.

Solar on the other hand is the least expensive of the three because large amounts of cooperate and government money has been poured into decades of research and development. Solar is also fairly simple for the DIY’er to install with some guidance. Solar is also the easiest to expand if your energy needs grow.

For these reasons, I’ve written this series. I want to help people gain the confidence to tackle a solar project and finally realize their dream of living a simpler life off the grid.

If you would like to be notified when each module of this series is released just fill out the information below.

Subscribe

* indicates required

Check out module 2 of this series “Why you should choose 12-volt solar for your DIY energy”

3 thoughts on “How to Build Your Own Small Solar System-How Efficient is Solar Energy

  1. I know they were having a quality issue with the panels made in China, and I also read that they supply almost all of the panels used in the US. I am concerned because even though new technology comes out, they only copy, not innovate. Do you have to spec where the panels come from and what is the premium like for US made panels?

    1. I can only speak to my experiences when it comes to solar panels. I have found the USA made panels are typically 30% to 50% higher for the same type of panels you can get from China. I’ve always gone the cheaper route to save money and have never had an issue with panels. Inverters are a different story. When I’ve gone cheap with inverters I usually regretted it. Innovation in the actual panel seems to move pretty slowly, so the copy strategy works well for China. Most of the innovation seems to be in the tangent components like charge controllers and inverters. Hope this helps.

  2. This article tells you about how to build your own small solar system and how efficient is it’s energy. This article provides us true and insightful information regarding the topic. I loved reading this article. I like the way they have researched and presented it in front of us.

Leave a Reply

Your email address will not be published. Required fields are marked *